Hydrophobic nanosheet silicalite-1 zeolite for iodine and methyl iodide capture.

Effective capture of radioactive iodine from nuclear fuel reprocessing is of great importance for public safety as well as the secure utility of nuclear energy. In this work, a hydrophobic nanosheet silicalite-1 (NSL-1) zeolite with an adjustable size was developed for efficient iodine (I2) and methyl iodide (CH3I) adsorption. The optimized all-silica zeolite NSL-1 exhibits an excellent I2 uptake capacity of 553 mg/g within 45 min and a CH3I uptake capacity of 262 mg/g within 1 h. Benefiting from the reduced thickness and enhanced porosity, microporous NSL-1 possesses enhanced iodine adsorption capacity and fast adsorption kinetics, which is a considerable high value among inorganic materials. Unexpectedly, the remarkable characters of high hydrophobicity, acid-resistance and anti-oxidation endow it a higher iodine uptake capacity than traditional aluminosilicate zeolites. More importantly, the high uptake selectivity toward I2 possessed by NSL-1 owing to its hydrophobic skeleton under simulated dynamic conditions. The low cost, facile and scalable synthesis of NSL-1 further highlights great prospects for applications in the nuclear industry. This work provides useful insights for designing efficient adsorbents for iodine capture.

Efficacy and safety of low-dose esketamine for painless gastrointestinal endoscopy in adults: a systematic evaluation and meta-analysis.

Object: The benefits of low-dose esketamine for painless gastrointestinal endoscopy remain unclear. As such, the present study aimed to investigate the efficacy and safety of low-dose esketamine for this procedure. Methods: Seven common databases were searched for clinical studies investigating low-dose esketamine for painless gastrointestinal endoscopy. Subsequently, a meta-analysis was performed to synthesize and analyze the data extracted from studies fulfilling the inclusion criteria. Results: Meta-analysis revealed that, compared with propofol, low-dose esketamine in combination with propofol significantly reduced recovery time by 0.56 min (mean difference [MD] -0.56%, 95% confidence interval (CI) -1.08 to -0.05, p = 0.03), induction time by 9.84 s (MD -9.84, 95% CI -12.93 to -6.75, p < 0.00001), propofol dosage by 51.05 mg (MD -51.05, 95% CI -81.53 to -20.57, p = 0.01), and increased mean arterial pressure by 6.23 mmHg (MD 6.23, 95% CI 1.37 to 11.08, p = 0.01). Meanwhile, low-dose esketamine reduced injection pain by 63% (relative risk [RR] 0.37, 95% CI 0.28 to 0.49, p < 0.00001), involuntary movements by 40% (RR 0.60, 95% Cl 0.42 to 0.85, p < 0.005), choking by 42% (RR 0.58, 95% Cl 0.38 to 0.88, p = 0.01), bradycardia by 68% (RR 0.32, 95% Cl 0.18 to 0.58, p = 0.0002), hypotension by 71% (RR 0.29, 95% Cl 0.21 to 0.40, p < 0.00001), respiratory depression by 63% (RR 0.37, 95% 0.26 to 0.51, p < 0.00001), additional cases of propofol by 53% (RR 0.47, 95% Cl 0.29 to 0.77, p = 0.002), and increased hypertension by 1000% (RR 11.00, 95% Cl 1.45 to 83.28, p = 0.02). There were no significant differences in mean heart rate, mean oximetry saturation, delirium, dizziness, vomiting, tachycardia, and hypoxemia. Subgroup analyses revealed that, compared with other dose groups, 0.25 mg/kg esketamine afforded additional benefits in recovery and induction time, mean arterial pressure, involuntary movements, hypoxemia, and respiratory depression. Conclusion: Low-dose esketamine was found to be safe and effective for providing anesthesia during gastrointestinal endoscopy, with 0.25 mg/kg identified as the optimal dose within the dosage ranges examined. However, caution should be exercised when administering this drug to patients with inadequate preoperative blood pressure control.

Actively tunable laser action in GeSn nanomechanical oscillators.

Mechanical forces induced by high-speed oscillations provide an elegant way to dynamically alter the fundamental properties of materials such as refractive index, absorption coefficient and gain dynamics. Although the precise control of mechanical oscillation has been well developed in the past decades, the notion of dynamic mechanical forces has not been harnessed for developing tunable lasers. Here we demonstrate actively tunable mid-infrared laser action in group-IV nanomechanical oscillators with a compact form factor. A suspended GeSn cantilever nanobeam on a Si substrate is resonantly driven by radio-frequency waves. Electrically controlled mechanical oscillation induces elastic strain that periodically varies with time in the GeSn nanobeam, enabling actively tunable lasing emission at >2 µm wavelengths. By utilizing mechanical resonances in the radio frequency as a driving mechanism, this work presents wide-range mid-infrared tunable lasers with ultralow tuning power consumption.

High-performance Ge-on-insulator lateral p-i-n waveguide photodetectors for electronic-photonic integrated circuits at telecommunication wavelengths.

We report high-performance germanium-on-insulator (GeOI) waveguide photodetectors (WGPDs) for electronic-photonic integrated circuits (EPICs) operating at telecommunication wavelengths. The GeOI samples were fabricated using layer transfer and wafer-bonding techniques, and a high-quality Ge active layer was achieved. Planar lateral p-i-n WGPDs were fabricated and characterized, and they exhibited a low dark current of 0.1 µA. Strain-induced alterations in the optical properties were observed, resulting in an extended photodetection range up to λ = 1638 nm. This range encompasses crucial telecommunication bands. The WGPDs exhibited a high responsivity of 0.56 A/W and a high detectivity of D ∗ = 1.87 ×109cmHz1/2W - 1 at 1550 nm. A frequency-response analysis revealed that increasing the bias voltage from -1 to -9 V enhances the 3-dB bandwidth from 31 to 49 MHz. This study offers a comprehensive understanding of GeOI WGPDs, fostering high-performance EPICs with implications for telecommunications and beyond.

Realization of white-light-emitting diodes from a high-brightness zirconium-based metal-organic gel driven by the AIE effect.

Developing luminescent materials with suitable correlated color temperature (CCT) and sufficient color-rendering index (CRI) is a challenging problem in the field of commercialized warm white LED lighting. Herein, a novel metal-organic gel (MOG) material named YTU-G-1(SE) was synthesized, consisting of zirconium metal coordinated with 1,1,2,2-tetrakis(4-carboxyphenyl) ethylene. YTU-G-1(SE) exhibits strong fluorescent properties with an aggregation-induced emission (AIE) effect, emitting yellow-green fluorescence at 515 nm. The internal and external quantum efficiencies (IQE/EQE) of YTU-G-1(SE) are close to unity, with values of 95.74 ± 0.5% and 88.67 ± 0.5%, respectively. Finally, we combined YTU-G-1(SE) with a commercial blue chip and a commercial red phosphor (Sr,Ca)AlSiN3:Eu2+ to fabricate a warm white light LED with a color temperature of 3736 K, a color-rendering index Ra of 88.2, and a lumen efficiency of 79.42 lm W-1. This work provides a new approach to regulating the emission of AIE and offers a novel idea for developing high-performance warm-white pc-WLEDs.

Topological Engineering Electrodes with Ultrafast Oxygen Transport for Super-Power Sodium-Oxygen Batteries.

Sodium-oxygen battery has attracted tremendous interest due to its extraordinary theoretical specific energy (1605 Wh kg-1 NaO2) and appealing element abundance. However, definite mechanistic factors governing efficient oxygen diffusion and consumption inside electrolyte-flooded air cathodes remain elusive thus precluding a true gas diffusion electrode capable of high discharge current (i.e., several mA cm-2) and superior output power. Herein, 3D-printing technology is adopted to create gas channels with tailored channel size and structure to demystify the diffusion-limited oxygen delivery process. It is revealed that as the clogging discharging products increase, large channel size, and interconnected channel structure are essential to guaranteeing fast O2 diffusion. Moreover, to further encourage O2 diffusion, a bio-inspired breathable cathode with progressively branching channels that balances between O2 passage and reaction is 3D printed. This elaborated 3D electrode allows a sodium-oxygen cell to deliver an impressive discharging current density of up to 4 mA cm-2 and an output power of 8.4 mW cm-2, giving rise to an outstanding capacity of 18.4 mAh cm-2. The unraveled mystery of oxygen delivery enabled by 3D printing points to a valuable roadmap for the rational design of metal-air batteries toward practical applications.

Determinants of the Surface Film during the Discharging Process in Lithium-Oxygen Batteries.

Lithium-oxygen batteries have one of the highest theoretical capacities and specific energies, but several challenges remain. One of them is premature death caused by a passivation layer with poor conductivities (both electronic and ionic) on the electrode surface during the discharge process. Once this thin layer forms on the surface of the catalyst and substrate, the overpotential significantly increases and causes early cell death. Therefore, understanding this thin layer is crucial to achieving high specific energy lithium-oxygen batteries. Herein, we quantitatively compared the ratio of lithium carbonate to lithium peroxide during the discharge process in a flow cell at different potentials. We found that the ratio rapidly increased at low potential and high flow rates. The surface route led to significant byproducts on the Au electrodes, and consequently, a 3 nm thick discharge product film passivates the electrode surface in a flow cell.

Electron Localization in Rationally Designed Pt1Pd Single-Atom Alloy Catalyst Enables High-Performance Li-O2 Batteries.

Li-O2 batteries (LOBs) are considered as one of the most promising energy storage devices due to their ultrahigh theoretical energy density, yet they face the critical issues of sluggish cathode redox kinetics during the discharge and charge processes. Here we report a direct synthetic strategy to fabricate a single-atom alloy catalyst in which single-atom Pt is precisely dispersed in ultrathin Pd hexagonal nanoplates (Pt1Pd). The LOB with the Pt1Pd cathode demonstrates an ultralow overpotential of 0.69 V at 0.5 A g-1 and negligible activity loss over 600 h. Density functional theory calculations show that Pt1Pd can promote the activation of the O2/Li2O2 redox couple due to the electron localization caused by the single Pt atom, thereby lowering the energy barriers for the oxygen reduction and oxygen evolution reactions. Our strategy for designing single-atom alloy cathodic catalysts can address the sluggish oxygen redox kinetics in LOBs and other energy storage/conversion devices.

Dissolved LiO2 or adsorbed LiO2? The reactive superoxide during discharging process in lithium-oxygen batteries.

Lithium-oxygen batteries are promising but have many challenges. Unlike lithium-ion batteries, they are usually discharge-charge cycled with capacity cutoff instead of potential cutoff, which brings controversy. Additionally, which superoxide intermediate, the dissolved or the adsorbed superoxide, is more reactive and leads to cell premature death and unsatisfactory discharge capacity? These questions puzzle researchers and impede the development of lithium-oxygen batteries. Herein, on one hand, we tried to decouple the influence of discharging potential and discharging current density on the discharge products and side reactions. We found that the electrode potential has more impact on the side reactions than the current density. The low potential leads to a high ratio of Li2CO3 to Li2O2 in the discharge product and hence more surface passivation. On the other hand, to identify the more reactive and aggressive species that cause surface passivation, a flow cell setup was applied to suppress the solution route and maximize the products from the surface route. Results show that more Li2CO3 was identified under a large flow rate and thus the intermediates in surface route appear to be more reactive than that in solution route.

Research status and hotspots of autoimmune gastritis: A bibliometric analysis.

BACKGROUND: As an emerging potential risk factor for gastric cancer, autoimmune gastritis (AIG) has garnered increasing attention from researchers. AIM: To analyze the research overview and popular topics in the field of AIG using bibliometrics. METHODS: Relevant publications on AIG in the Web of Science Core Collection were collated, and data visualization and analysis of the number of publications, countries, institutions, journals, authors, keywords, and citations were performed using software such as VOSviewer, CiteSpace, and Scimago Graphic. RESULTS: In total, 316 relevant articles were included in the analysis. From 2015 to 2022, the number of publications increased annually. The countries, institutions, authors, and journals with the highest number of publications in this field were Italy, Monash University, Toh BH, and Internal Medicine. The main keywords used in this field of research were pathogenesis, Helicobacter pylori, autoantibody, parietal cell antibody, atrophic gastritis, classification, diagnosis, autoimmune disease, risk, cancer, gastric cancer, vitamin B12 deficiency, and pernicious anemia. The following directions may be popular for future research: (1) The role of Helicobacter pylori in the pathogenesis of AIG; (2) diagnostic criteria for AIG and reference values for serum antibodies; (3) comorbidity mechanisms between AIG and other autoimmune diseases; (4) specific risks of AIG complicating gastric and other cancers; and (5) the role of vitamin B12 supplementation in patients with early-stage AIG. CONCLUSION: This bibliometric analysis reported on popular topics and emerging trends in AIG, with diagnosis and prognosis being research hotspots in this field.

Migrated Laparoscopic Surgical Clips Causing Acute Cholangitis 32 Years After Laparoscopic Cholecystectomy.

Surgical clip migration post-laparoscopic cholecystectomy is a rare but important complication to consider in patients presenting with biliary obstruction. Titanium surgical clips are widely used in laparoscopic surgery to ligate vessels and ducts and are particularly important in laparoscopic cholecystectomy to ligate the cystic duct. More common complications associated with clips involve dislodgement, however, there are reported cases of migration into visceral structures causing an obstruction. We describe a case that demonstrated an acute migration of surgical clips into the common bile duct (CBD) within a three-week period, which occurred 32 years after laparoscopic cholecystectomy, likely attributed to erosion. On the patient's first presentation, she had acute pancreatitis with a CT demonstrating clips in the correct position. Three weeks later, the patient presented a second time with acute cholangitis and the repeat CT demonstrated the clips in the CBD. We hypothesize that the erosion of the bile duct is due to the pressure effects from either intra-abdominal organ movements or subtle clip movements, and eventually, persistent erosion leading to intra-ductal migration of the clips with the passage of the clips along the path of least resistance into the CBD, resulting in biliary obstruction. Management included standard treatment for biliary obstruction with intravenous broad-spectrum antibiotics and endoscopic retrograde cholangiopancreatography with excellent outcomes.

Br-Doped BiOCl Nanosheet Exposed (001) Facet: Surface Oxygen Vacancy and Directed Electron Flow Boosting the Photocatalytic Performance.

The defective BiOCl nanosheet exposed (001) facet with favorable photocatalytic performance was designed. The surface microstructure analysis and theoretical calculation certified the dominant exposed (001) facet and rich surface oxygen defects of Br--doped BiOCl (B-6) nanosheets. The energy level structure analysis indicates that the band gap can be narrowed and the light absorption range can be widened by introducing Br- to BiOCl, and the presence of defective energy levels increases the photogenerated carrier transfer efficiency. Moreover, the doping of Br- in BiOCl promotes the directional flow of electrons to the surface of B-6, which improves the photocatalytic performance of the sample. Thus, the Br--doped BiOCl can degrade 96.5% RhB within 6 min under visible-light irradiation with high apparent reaction rate constants of 0.51 min-1, exhibiting the strongest photocatalytic degradation performance. This work provides guidance for the preparation of Bi-based photocatalysts with excellent performance.

N6-Methyladenosine-Modified ATP8B1-AS1 Exerts Oncogenic Roles in Hepatocellular Carcinoma via Epigenetically Activating MYC.

Purpose: N6-methyladenosine (m6A) modification has shown critical roles in regulating mRNA fate. Non-coding RNAs also have important roles in various diseases, including hepatocellular carcinoma (HCC). However, the potential influences of m6A modification on non-coding RNAs are still unclear. In this study, we identified a novel m6A-modified ATP8B1-AS1 and aimed to investigate the effects of m6A on the expression and role of ATP8B1-AS1 in HCC. Methods: qPCR was performed to measure the expression of related genes. The correlation between gene expression and prognosis was analyzed using public database. m6A modification level was measured using MeRIP and single-base elongation- and ligation-based qPCR amplification method. The roles of ATP8B1-AS1 in HCC were investigated using in vitro and in vivo functional assays. The mechanisms underlying the roles of ATP8B1-AS1 were investigated by ChIRP and ChIP assays. Results: ATP8B1-AS1 is highly expressed in HCC tissues and cell lines. High expression of ATP8B1-AS1 is correlated with poor overall survival of HCC patients. ATP8B1-AS1 is m6A modified and the 792 site of ATP8B1-AS1 is identified as an m6A modification site. m6A modification increases the stability of ATP8B1-AS1 transcript. m6A modification level of ATP8B1-AS1 is increased in HCC tissues and cell lines, and correlated with poor overall survival of HCC patients. ATP8B1-AS1 promotes HCC cell proliferation, migration, and invasion, which were abolished by the mutation of m6A-modified 792 site. Mechanistic investigation revealed that m6A-modified ATP8B1-AS1 interacts with and recruits m6A reader YTHDC1 and histone demethylase KDM3B to MYC promoter region, leading to the reduction of H3K9me2 level at MYC promoter region and activation of MYC transcription. Functional rescue assays showed that depletion of MYC largely abolished the oncogenic roles of ATP8B1-AS1. Conclusion: m6A modification level of ATP8B1-AS1 is increased and correlated with poor prognosis in HCC. m6A-modified ATP8B1-AS1 exerts oncogenic roles in HCC via epigenetically activating MYC expression.

Long wavelength mid-infrared multi-gases spectroscopy using tunable single-mode slot waveguide quantum cascade laser.

Single-mode tunable quantum cascade lasers (QCLs) are promising for high-resolution and highly sensitive trace gases sensing across the mid-infrared (MIR) region. We report on the development of a tunable single-mode slot waveguide QCL array in the long wavelength part of the MIR regime (>12 µm). This laser array exhibits a tuning range of around 12 cm-1, from 735.3 to 747.3 cm-1. Using this developed single-mode tunable QCL, we demonstrate individual gas sensing, yielding the detection limit of 940 ppb and 470 ppb for acetylene and o-xylene, respectively. To verify the potential of the developed QCL array in multi-species gas detection, laser absorption measurements of two mixed gases of acetylene and o-xylene were conducted, showing the absorption features of the corresponding gases agree well with the theoretical predictions.

Enhanced second-harmonic generation in strained germanium-on-insulator microdisks for integrated quantum photonic technologies.

Quantum photonic circuits have recently attracted much attention owing to the potential to achieve exceptional performance improvements over conventional classical electronic circuits. Second-order χ(2) nonlinear processes play an important role in the realization of several key quantum photonic components. However, owing to their centrosymmetric nature, CMOS-compatible materials including silicon (Si) and germanium (Ge) traditionally do not possess the χ(2) response. Recently, second-harmonic generation (SHG) that requires the χ(2) response was reported in Ge, but no attempts at enhancing the SHG signal have been conducted and proven experimentally. Herein, we demonstrate the effect of strain on SHG from Ge by depositing a silicon nitride (Si3N4) stressor layer on Ge-on-insulator (GOI) microdisks. This approach allows the deformation of the centrosymmetric unit cell structure of Ge, which can further enhance the χ(2) nonlinear susceptibility for SHG emission. The experimental observation of SHG under femtosecond optical pumping indicates a clear trend of enhancement in SHG signals with increasing strain. Such improvements boost conversion efficiencies by 300% when compared to the control counterpart. This technique paves the way toward realizing a CMOS-compatible material with nonlinear characteristics, presenting unforeseen opportunities for its integration in the semiconductor industry.

Development of mixed pitch grating for the optical addressing of trapped Sr+ ion with data analysis techniques.

Mixed pitch gratings are developed for the optical addressing of trapped 88Sr+ ion by means of simulation and experimental measurement approaches. Meanwhile, Python-based data analysis techniques were developed to analyze simulated and measured beam profiles. A fixed pitch grating with a pitch of 1.2 µm was used as a reference, and a mixed pitch grating with pitches of 1.1/1.2 µm of various ratios are investigated. The Python-based data analysis codes demonstrates highly automated capability in processing both simulated and measured beam profile data to compute key parameters, including beam waist and Gaussian fitting. Mixed pitch grating delivers light beam with smaller beam waist (17.4 µm) compared to the fixed pitch grating (26.4 µm), exhibiting ∼34% beam waist reduction.

Extreme Polarization Anisotropy in Resonant Third-Harmonic Generation from Aligned Carbon Nanotube Films.

Carbon nanotubes (CNTs) possess extremely anisotropic electronic, thermal, and optical properties owing to their 1D character. While their linear optical properties have been extensively studied, nonlinear optical processes, such as harmonic generation for frequency conversion, remain largely unexplored in CNTs, particularly in macroscopic CNT assemblies. In this work, macroscopic films of aligned and type-separated (semiconducting and metallic) CNTs are synthesized and polarization-dependent third-harmonic generation (THG) from the films with fundamental wavelengths ranging from 1.5 to 2.5 µm is studied. Both films exhibited strongly wavelength-dependent, intense THG signals, enhanced through exciton resonances, and third-order nonlinear optical susceptibilities of 2.50 × 10-19  m2  V-2 (semiconducting CNTs) and 1.23 × 10-19  m2  V-2 (metallic CNTs), respectively are found, for 1.8 µm excitation. Further, through systematic polarization-dependent THG measurements, the values of all elements of the susceptibility tensor are determined, verifying the macroscopically 1D nature of the films. Finally, polarized THG imaging is performed to demonstrate the nonlinear anisotropy in the large-size CNT film with good alignment. These findings promise applications of aligned CNT films in mid-infrared frequency conversion, nonlinear optical switching, polarized pulsed lasers, polarized long-wave detection, and high-performance anisotropic nonlinear photonic devices.

Electrically-pumped compact topological bulk lasers driven by band-inverted bound states in the continuum.

One of the most exciting breakthroughs in physics is the concept of topology that was recently introduced to photonics, achieving robust functionalities, as manifested in the recently demonstrated topological lasers. However, so far almost all attention was focused on lasing from topological edge states. Bulk bands that reflect the topological bulk-edge correspondence have been largely missed. Here, we demonstrate an electrically pumped topological bulk quantum cascade laser (QCL) operating in the terahertz (THz) frequency range. In addition to the band-inversion induced in-plane reflection due to topological nontrivial cavity surrounded by a trivial domain, we further illustrate the band edges of such topological bulk lasers are recognized as the bound states in the continuum (BICs) due to their nonradiative characteristics and robust topological polarization charges in the momentum space. Therefore, the lasing modes show both in-plane and out-of-plane tight confinements in a compact laser cavity (lateral size ~3λlaser). Experimentally, we realize a miniaturized THz QCL that shows single-mode lasing with a side-mode suppression ratio (SMSR) around 20 dB. We also observe a cylindrical vector beam for the far-field emission, which is evidence for topological bulk BIC lasers. Our demonstration on miniaturization of single-mode beam-engineered THz lasers is promising for many applications including imaging, sensing, and communications.

Enhanced light emission of germanium light-emitting-diode on 150 mm germanium-on-insulator (GOI).

Germanium-on-insulator (GOI) has emerged as a novel platform for Ge-based electronic and photonic applications. Discrete photonic devices, such as waveguides, photodetectors, modulators, and optical pumping lasers, have been successfully demonstrated on this platform. However, there is almost no report on the electrically injected Ge light source on the GOI platform. In this study, we present the first fabrication of vertical Ge p-i-n light-emitting diodes (LEDs) on a 150 mm GOI substrate. The high-quality Ge LED on a 150-mm diameter GOI substrate was fabricated via direct wafer bonding followed by ion implantations. As a tensile strain of 0.19% has been introduced during the GOI fabrication process resulting from the thermal mismatch, the LED devices exhibit a dominant direct bandgap transition peak near 0.785 eV (∼1580 nm) at room temperature. In sharp contrast to conventional III-V LEDs, we found that the electroluminescence (EL)/photoluminescence (PL) spectra show enhanced intensities as the temperature is raised from 300 to 450 K as a consequence of the higher occupation of the direct bandgap. The maximum enhancement in EL intensity is a factor of 140% near 1635 nm due to the improved optical confinement offered by the bottom insulator layer. This work potentially broadens the GOI's functional variety for applications in near-infrared sensing, electronics, and photonics.

A Route toward High-Detectivity and Low-Cost Short-Wave Infrared Photodetection: GeSn/Ge Multiple-Quantum-Well Photodetectors with a Dielectric Nanohole Array Metasurface.

High-detectivity and low-cost short-wave infrared photodetectors with complementary metal-oxide-semiconductor (CMOS) compatibility are attractive for various applications such as next-generation optical communication, LiDAR, and molecular sensing. Here, GeSn/Ge multiple-quantum-well (MQW) photodetectors with a dielectric nanohole array metasurface were proposed to realize high-detectivity and low-cost SWIR photodetection. The Ge nanohole array metasurface was utilized to enhance the light absorption in the GeSn/Ge MQW active layer. Compared with metallic nanostructures, the dielectric nanohole structure has the advantages of low intrinsic loss and CMOS compatibility. The introduction of metasurface architecture facilitates a 10.5 times enhanced responsivity of 0.232 A/W at 2 µm wavelength while slightly sacrificing the dark current density. Besides, the metasurface GeSn/Ge MQW photodetectors benefit 35% improvement in the 3 dB bandwidth compared to control GeSn/Ge MQW photodetectors, which can be attributed to the reduced RC delay. Due to the high responsivity and low dark current density, the room temperature specific detectivity at 2 µm is as high as 5.34 × 109 cm·Hz1/2/W, which is the highest among GeSn photodetectors and is better than commercial InSb and PbSe photodetectors operating at the similar wavelength. This work offers a promising approach for achieving low-cost and effective photodetection at 2 µm, contributing to the development of the 2 µm communication band.